China supplier Guide Wheel Device/ Head Sheave/ Sheave Pulley for Mine Hoist wholesaler

Product Description

                       Xihu (West Lake) Dis. Wheel Device/ Head Sheave/ Sheave Pulley for Mine Hoist

Product Introduction
 Xihu (West Lake) Dis. wheel device can transport the whole under the premise of swimming round and fixed wheel adopts integral cast joint structure, wheel hub, wheel rim for cast steel materials, spoke for the channel steel, after welding the whole annealing process again. 

Considering the replacement bearing maintenance convenient, leave replace bearing remove space, guide wheel device structure adopted eccentric layout. 

Xihu (West Lake) Dis. shaft using middle carbon alloy steel forging whole, adopting the structure of the cast joint pulley, equipped with PVC or nylon liner, protect the wire rope. 

Imported or domestic spherical roller bearings, also can install bearing temperature measuring element. 

In order to prolong the service life of wire rope, rim inside wedge liner with wear-resisting, withstand voltage, using D660 (1571) or nylon liner. 

1) eccentric layout: on 1 side of a winding wheel have replaced bearing dismantling space, can not remove the pulley mechanism, only for bearing maintenance and replacement. 
2) symmetry layout: relative with 4 wheels on both sides of the 2 bearing seat is symmetrical, but need to replace the bearing shell, only to remove the pulley mechanism. 
 
sheave pulley and the common malfunction and technical guide wheel 

1) to the problem of old structure pulley sliding bearing to burn tile should improve lubrication way; Because of the pulley is installed on the derrick, daily maintenance inconvenience, should add temperature alarm device, so as to timely maintenance to prevent the tile burning failure, or the original sliding bearing replacement into rolling bearing structure 

2) for old structure pulley rope groove without liner, can no longer add padding on the original rope groove, need to change a gasketed pulley, adjacent assembly size can remain motionless, and installation 

3) for mountain transportation difficulties or have some difficulties in roadway transportation in underground mine, the pulley is (guide wheel) change the structure into 2 or 4 and a half of head sheave.

Our Services

1>.Pre-sale services: 

We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.

2>.Sale services: 
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

3>.After-sale services: 
To establish long term friendship, we will regularly pay return visit to customers.
Supplying technique, building design, instruction, installation and debugging for free.

4>.We provide one-year warranty to make sure your machine runs consistently
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in 2 years.

Type: Electric Winch
Driven Type: AC
Speed: Fast
Reel Number: 1 / 2
Running Mode: Stationary
Certification: CE, ISO 9001
Customization:
Available

|

Customized Request

sheave pulley

How are sheave pulleys used in the operation of cranes and hoists?

Sheave pulleys play a vital role in the operation of cranes and hoists, enabling the lifting and movement of heavy loads. Here is a detailed explanation of how sheave pulleys are used in the operation of cranes and hoists:

In cranes and hoists, sheave pulleys are typically incorporated into the lifting mechanism, often in combination with cables or ropes. The integration of sheave pulleys involves the following steps:

1. Lifting Mechanism Design: The lifting mechanism of a crane or hoist is designed based on the specific requirements of the lifting operation. Factors such as load capacity, lifting height, and application type are taken into consideration.

2. Wire Rope Selection: The appropriate wire rope or cable is selected based on the load capacity and other relevant factors. The wire rope is chosen to have suitable properties such as strength, flexibility, and resistance to wear or corrosion.

3. Sheave Pulley Configuration: Sheave pulleys are configured and positioned within the lifting mechanism to guide and support the wire rope. The pulleys are mounted on a framework or structure that allows them to rotate freely.

4. Multiple Pulley Systems: Cranes and hoists often utilize multiple sheave pulleys arranged in various configurations to achieve mechanical advantage and increase lifting capacity. These configurations include single sheave, double sheave, and multiple sheave arrangements.

5. Wire Rope Routing: The wire rope is threaded through the grooves of the sheave pulleys, creating a continuous loop. The pulleys guide the wire rope along the intended path, ensuring proper alignment and minimizing friction.

6. Drive Mechanism: A drive mechanism, such as an electric motor or hydraulic system, provides the power necessary to rotate the sheave pulleys. The rotation of the pulleys causes the wire rope to move, lifting or lowering the load.

7. Lifting and Lowering: When the crane or hoist is operated, the sheave pulleys rotate, causing the wire rope to move. As the wire rope is wound or unwound from the pulleys, the load is lifted or lowered accordingly. The mechanical advantage provided by the multiple pulley systems allows for efficient lifting and precise control.

8. Load Control and Safety: Cranes and hoists incorporate various control mechanisms, such as brakes and limit switches, to ensure safe and controlled lifting operations. These mechanisms work in conjunction with the sheave pulleys and other components to prevent overloading, uncontrolled descent, or other hazardous situations.

Regular maintenance and inspection of the sheave pulleys, wire rope, and other lifting components are essential to ensure the continued safe and reliable operation of cranes and hoists. This includes lubrication of the pulleys, checking for signs of wear or damage, and making necessary adjustments or replacements to maintain optimal functionality.

sheave pulley

What advantages do sheave pulleys offer for efficient load-bearing and cable routing?

Sheave pulleys offer several advantages for efficient load-bearing and cable routing in various applications. Here is a detailed explanation of the advantages provided by sheave pulleys:

1. Load Distribution: Sheave pulleys help distribute loads evenly across cables or ropes. By guiding the cables through the grooves of the pulley, the load is spread across multiple points of contact. This load distribution reduces stress on individual cables, preventing overloading and potential failure. It ensures that the load is efficiently carried and supported, enhancing the overall load-bearing capacity of the system.

2. Reduced Friction: Sheave pulleys minimize friction between cables and the surrounding structure. The smooth grooves of the pulley allow cables to move freely without excessive rubbing or snagging. This reduced friction reduces wear and tear on the cables, extending their lifespan and maintaining their strength and integrity. It also reduces the power required to move the cables, resulting in more efficient operation and energy savings.

3. Improved Cable Routing: Sheave pulleys facilitate efficient cable routing by guiding cables along a specific path. The pulleys ensure that the cables follow the desired route, preventing tangling, entanglement, or interference with other components. This organized and controlled cable routing improves the overall system efficiency, reduces the risk of damage or accidents, and enhances the ease of maintenance and troubleshooting.

4. Directional Changes: Sheave pulleys allow for smooth directional changes in cable systems. By incorporating pulleys at strategic points, cables can be redirected without abrupt or sharp turns. This gradual change in direction minimizes stress and strain on the cables, preventing kinks and bends that could weaken the cables or impede their movement. The ability to smoothly navigate directional changes ensures efficient cable routing and reliable operation of the system.

5. Adjustability: Sheave pulleys offer adjustability for accommodating different cable sizes and tensions. The diameter and configuration of the pulleys can be selected based on the specific requirements of the cables and the load-bearing capacity needed. This adjustability allows for the use of various cable types and sizes in the same system, providing flexibility and adaptability. It also enables fine-tuning of cable tension, ensuring optimal performance and minimizing slack or excessive tension in the cables.

6. Multiple Cable Support: Sheave pulleys can support multiple cables simultaneously. In applications where multiple cables or ropes need to be routed and supported, sheave pulleys allow for efficient handling of multiple lines. The grooves in the pulley can accommodate multiple cables, ensuring that each cable is properly guided and supported. This capability is particularly useful in scenarios such as lifting systems, cranes, and rigging applications.

7. Noise Reduction: Sheave pulleys help reduce noise generated by cable movement. The smooth operation of the cables within the pulley grooves minimizes vibrations and rattling noises that can occur when cables come into contact with other surfaces. This noise reduction is especially beneficial in applications where quiet operation is desired, such as in theater rigging systems or residential elevators.

Overall, sheave pulleys offer numerous advantages for efficient load-bearing and cable routing. They ensure load distribution, reduce friction, improve cable routing, facilitate directional changes, provide adjustability, support multiple cables, and contribute to noise reduction. These advantages enhance the performance, reliability, and longevity of systems that rely on cables or ropes for load-bearing and cable routing purposes.

sheave pulley

Can you explain the types of cables or ropes typically used with sheave pulleys?

When it comes to sheave pulleys, different types of cables or ropes can be used depending on the specific application and desired functionality. Here is a detailed explanation of the types of cables or ropes typically used with sheave pulleys:

1. Wire Rope: Wire ropes are commonly used with sheave pulleys in various lifting and cable-based systems. They are constructed by intertwining individual steel wires to form strands, which are then twisted together to create the final wire rope. Wire ropes offer excellent strength, durability, and resistance to abrasion and crushing. They are suitable for heavy-duty applications that require high load capacity and robust performance.

2. Synthetic Rope: Synthetic ropes, such as nylon or polypropylene ropes, are also frequently used with sheave pulleys. These ropes are made from synthetic fibers and offer advantages such as lightweight, flexibility, and resistance to chemicals and UV rays. Synthetic ropes are commonly used in applications where weight reduction, corrosion resistance, or non-conductivity are important considerations.

3. Flat Belt: In some cases, flat belts made of materials such as rubber or fabric-reinforced rubber are used with sheave pulleys. Flat belts provide a wide contact surface area with the pulley groove, allowing for efficient power transmission. They are commonly used in applications that require smooth and quiet operation, such as conveyor systems or certain types of machinery.

4. V-Belt: V-belts, also known as wedge belts, are a type of belt with a trapezoidal cross-section. They are commonly used with sheave pulleys in various power transmission applications. V-belts provide high traction due to their wedged shape, allowing for efficient power transfer and reduced slip. They are often used in applications that require high-speed power transmission, such as automotive engines or industrial machinery.

5. Timing Belt: Timing belts, also called synchronous belts, are toothed belts that engage with matching toothed pulleys. They are used with sheave pulleys in applications that require precise motion control and synchronization, such as in timing systems for engines or precision machinery. Timing belts offer low maintenance, high efficiency, and accurate positioning capabilities.

6. Cable or Rope Assemblies: In certain specialized applications, pre-assembled cable or rope assemblies may be used with sheave pulleys. These assemblies typically consist of steel cables or synthetic ropes with fittings or connectors already attached. They are commonly used in scenarios where specific load capacities, safety requirements, or customization are necessary, such as in maritime applications, material handling equipment, or suspension bridge systems.

It’s important to note that the selection of the appropriate cable or rope for a sheave pulley system depends on various factors, including the application requirements, load capacity, environmental conditions, and desired performance characteristics. Consulting with manufacturers or engineering professionals can help determine the most suitable type of cable or rope for a specific sheave pulley application.

China supplier Guide Wheel Device/ Head Sheave/ Sheave Pulley for Mine Hoist   wholesaler China supplier Guide Wheel Device/ Head Sheave/ Sheave Pulley for Mine Hoist   wholesaler
editor by CX

2023-12-11

Sheave Pulley

As one of the sheave pulley manufacturers, suppliers, and exporters of mechanical products, We offer sheave pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of sheave pulley.

Recent Posts